Installation of air conditioners

Where the air conditioner is installed directly affects efficiency, if you hang the indoor air conditioner unit in the closet, it simply will not work.

Indoor unit it is better to place it on a free wall so that the air flow is evenly distributed throughout the room and does not blow directly onto the bed or workplace. Leave a gap of at least 10-15 cm on top; this is necessary for normal air circulation and convenient filter maintenance.

External unit It is installed in a well-ventilated place — on the facade, balcony or roof. We always choose a location that is easy to access and secure. As a rule, we determine the installation location based on the technical conditions at the site.

What is included in the standard installation of an air conditioner:

1. Drilling an Ø52 mm hole, up to 400 mm long, in a wall made of cinder block, brick, aerated concrete, foam block, sandwich panels and other materials other than reinforced concrete and metal.
2. Installation of outdoor unit brackets without the use of industrial mountaineering technologies, with safe access from the ground or stairs.
3. Installation of the indoor unit mounting plate at a height not higher than 2500 mm from the floor level.
4. Installation and connection of a complete air conditioner route with copper pipes, a drainage line and an interconnect cable.
5. Route evacuation — removing air and moisture from the system before start-up. This step is necessary for the equipment to operate correctly and increase the service life of the compressor.
6. Start-up and commissioning — checking the pressure, tightness of the connections and starting the air conditioner in cooling and heating modes.

The quality of installation in everything

“We connect the electrical part to WAGO terminals — it's safe and accurate.”

Drainage is removed with a slope so that the water flows freely and does not stagnate. We use reinforced brackets, anchor brackets — the design is reliable, can withstand loads and does not create vibrations. If the site requires high-altitude work, we can arrange installation using climbing equipment — safely and accurately.

We install turnkey air conditioners, strictly following the technology, checking the tightness and starting them in operating mode. The main goal is for the system to work quietly, steadily and for a long time.

If the facility requires high-altitude work, we can arrange installation using climbing equipment safely and accurately.

‍

Drainage is removed with a slope so that the water flows freely and does not stagnate. We use reinforced brackets, anchor brackets — the design is reliable, can withstand loads and does not create vibrations. If the site requires high-altitude work, we can arrange installation using climbing equipment — safely and accurately.

We install turnkey air conditioners, strictly following the technology, checking the tightness and starting them in operating mode. The main goal is for the system to work quietly, steadily and for a long time.

If the facility requires high-altitude work, we can arrange installation using climbing equipment safely and accurately.